View source for Virtual Machine Setup Development

For now on It is not posible to use Ubuntu 9.10 anymore. It is no longer being maintained and no
longer has repositories to setup anything.

You'll have to use Ubuntu 11.10



== Common applications for php development ==
apt-get install
 sudo apt-get install apache2 postgresql-8.4 postgresql-contrib-8.4 \
 php5 php5-pgsql php5-sqlite php5-cli php5-imagick php5-gd php-pear phpunit \
 vim-gnome subversion cvs php5-curl php5-dev php5-json
make
 sudo apt-get install make
pear
 sudo pear upgrade PEAR
 sudo pear upgrade-all
xdebug
 sudo pecl install xdebug
phpunit
 sudo pear channel-discover pear.phpunit.de
 sudo pear channel-discover pear.symfony-project.com
 sudo pear install --force --alldeps phpunit/PHPUnit
 sudo pear install phpunit/PHPUnit_Selenium
 sudo pear install phpunit/DbUnit
phing
 sudo pear channel-discover pear.phing.info
 sudo pear install phing/phing
VersionControl SVN
 sudo pear config-set preferred_state alpha
 sudo pear install VersionControl_SVN
vfsStream
 sudo pear channel-discover pear.bovigo.org
 sudo pear install bovigo/vfsStream-beta
Apache setup
 /etc/apache2/envvars
  export GLM_HOST_ID=DEVELOPMENT
 sudo chown -R www-data.www-data /var/www
 sudo chmod -R 2770 /var/www
 sudo mkdir /var/www/server
 sudo mkdir /var/www/log
 sudo vim /etc/apache2/sites-available/default
  change all instances of /var/www to /var/www/server
  change <Directory /var/www/> to <Directory /var/www/server/>
  change the AllowOverride on the directory /var/www/server/ from None to All
 sudo a2enmod rewrite
 edit /etc/apache2/mods-enabled/dir.conf
  add index.phtml to DirectoryIndex
 /etc/apache2/apache2.conf
  add "ServerName {yourservername}" to the end of the file to avoid complaints when restarting server.
 sudo service apache2 restart
postgres setup
 sudo vim /etc/postgresql/8.4/main/pg_hba.conf
 Change all methods to trust
 sudo service postgresql restart
 
 * if you downgrade (from 9.1) to 8.4, uninstall the newer version before installing the older version, otherwise 8.4 will use
 * port 5433, and you may start getting "could not connect to server: Connection refused" errors. You will need to 
 * sudo vim /etc/postgresql/8.4/main/postgresql.conf and change the port number to 5432, and change the one for 9.1 to use 5433
 * then, do "sudo service postgresql restart"
php setup
 set your ini files to max memory of at least 60 or maybe 200
 use sudo
  /etc/php5/cli/php.ini
   safe_mode_allowed_env_vars = PHP_,GLM_
   memory_limit = 200
  /etc/php5/apache2/php.ini
   variables_order = "EGPCS" -- refers to already uncommented one
   safe_mode_allowed_env_vars = PHP_,GLM_
   extension=xdebug.so -- may already be set up by pecl
   memory_limit = 200
 go change the permission of the /usr/bin/phpunit file so your user can execute the file
(sudo chmod u+x /usr/bin/phpunit)
 and change the /usr/share/php directory to yourself as the user
(sudo chown whateveryourusernameis /usr/share/php)
 /etc/apache2/envvars
   export GLM_HOST_ID=DEVELOPMENT
 /etc/profile
   umask 007
   export GLM_HOST_ID=DEVELOPMENT
 sudo service apache2 restart

== phpunit ==
For running phpunit you'll need to setup your ENV varaible of GLM_HOST_ID somehow.

You can setup a prepend file that gets prepended and sets the env that way.

this needs to be set in cli/php.ini not apache2/php.ini under the /etc/php5

You'll need to set error_reporting to E_NOTICE where it has DEPRECIATED and set allow_call_time_pass_reference = On

== PDFlib ==
Install PDFlib version 9 for PHP

To download the current PDFlib, go to the following URL.
 http://www.pdflib.com/download/
Select the following software section.
 Download the PDFlib product family
Download the appropriate package family. Be sure to select the package for PHP! Typically your environment will be ...
 Linux x86
or
 Linux Intel 64
Save this file to your desired temporary location then un-archive the package. (Using correct file name of course.)
 tar -zxf PDFlib-9.0.2-Linux-x86_64-php.tar.gz
Determine your version of PHP.
 php -i | grep "PHP Version"
Determine the proper destination directory for the php_pdflib.so file. First check php.ini. (adjust directories as needed)
 grep extension_dir /etc/php5/apache2/php.ini
If all resulting lines are commented out with ";", then look for the default directory. It will be something like ...
 /usr/lib/php5/20090626/
Copy the php_pdflib.so file to the directory determined above and set the proper file mode. The correct source file will be in "bind/php/php-xxx" where xxx would be the version of PHP you have. (If your processor and operating system support Multi-Threading, use the file with "mt".) For example ...
 sudo cp bind/php/php-530/php_pdflib.so /usr/lib/php5/20090626/.
 sudo chmod 644 /usr/lib/php5/20090626/php_pdflib.so
Add the following to your php.ini file (usually /etc/php5/apache2/php.ini).
 extension=php_pdflib.so
Restart Apache
 sudo apache2ctl restart
To check if PDFlib loaded properly do the following. You should see several lines regarding PDFlib.
 php -i | grep PDFlib
If there are problems, check the Apache error log.

== Other ==
for some application that mail stuff out (forms and such)
install sendmail 
and mailutils

== Samba for /var/www/server ==
you have to install samba and smbfs first
 sudo apt-get install samba smbfs

Edit /etc/samba/smb.conf
Change workgroup as desired
  workgroup = FRNTOFFICE

Uncomment these
  wins support = no
  bind interfaces only = yes
  security = user

Comment out these
  unix password sync = yes
  map to guest = bad user

If you want access to your home directory, also uncomment and set these lines.
  [homes]
    comment = Home Directories
    browseable = yes
    writeable = yes
    valid users = %S

Add to end
  [server]
    comment = Web Server Files
    path = /var/www/server
    guest ok = no
    read only = no
    browseable = yes
    create mask = 0770
    directory mask = 2770
    valid users = {PUT YOUR USER NAME HERE}
    writable = yes

End of editing /etc/samba/smb.conf

run
  service smbd restart

Change permissions on everything in your www directory 
  sudo chown -R www-data.www-data /var/www/*
  sudo chmod -R g+w /var/www/*

Edit /etc/group to add your user to group www-data - Just add your user ID to the end of the line and don't change anything else such as the gid which shows here as 33.
  www-data:x:33:cscott

== SSH Server Setup - To be able to SSH to this virtual machine ==
apt-get install openssh-server

== Setup with PHP 5.2 ==
After check out of app.gaslightmedia.com

in your app.gaslightmedia.com directory 
 svn co <nowiki>http://cvs2/svn/glmZend/trunk</nowiki> glmZend
 svn co <nowiki>http://cvs2/svn/glmPEAR/tags/5.2</nowiki> glmPEAR
 svn co <nowiki>http://cvs2/svn/ckeditor/trunk</nowiki> ckeditor
 svn co <nowiki>http://cvs2/svn/CommonApps/trunk</nowiki> CommonApps

== Setup with PHP 5.3 ==
After check out of app.gaslightmedia.com

in your app.gaslightmedia.com directory 
 svn co <nowiki>http://cvs2/svn/glmZend/trunk</nowiki> glmZend
 svn co <nowiki>http://cvs2/svn/glmPEAR/trunk</nowiki> glmPEAR
 svn co <nowiki>http://cvs2/svn/ckeditor/trunk</nowiki> ckeditor
 svn co <nowiki>http://cvs2/svn/CommonApps/trunk</nowiki> CommonApps

== Setup with PHP 5.4 ==
After check out of app.gaslightmedia.com

in your app.gaslightmedia.com directory 
 svn co <nowiki>http://cvs2/svn/glmZend/trunk</nowiki> glmZend
 svn co <nowiki>http://cvs2/svn/glmPEAR/branches/5.4</nowiki> glmPEAR
 svn co <nowiki>http://cvs2/svn/ckeditor/trunk</nowiki> ckeditor
 svn co <nowiki>http://cvs2/svn/CommonApps/trunk</nowiki> CommonApps

== xdebug ==
to get work correctly you need html_errors On

== Changing Console Resolution for Ubuntu Server ==
If you're running an Ubuntu Server (no GUI) as your virtual machine, you may want to change the screen resolution to save screen space or provide a larger screen area for your console. This is the procedure for doing so.

Reboot your virtual machine and enter "C" while on the Grub screen.

Enter "vbeinfo" to display the available resolutions and note the desired resolution from those available.

Boot your virtual machine.

edit "/etc/default/grub"

Set the resolution by changing the following line to the desired resolution.
  GRUB_GFXMODE=800x600

Enter the following command...
  sudo update-grub

Reboot and enjoy.

== Install apt-show-versions to be able to list versions for installed packages (optional) ==
Install 
 sudo apt-get install apt-show-versions

Use
 apt-show-versions {package}