Difference between revisions of "Virtual Machine Setup Development"

Latest revision as of 11:13, 30 June 2014

For now on It is not posible to use Ubuntu 9.10 anymore. It is no longer being maintained and no longer has repositories to setup anything.

You'll have to use Ubuntu 11.10

Common applications for php development

apt-get install

sudo apt-get install apache2 postgresql-8.4 postgresql-contrib-8.4 \
php5 php5-pgsql php5-sqlite php5-cli php5-imagick php5-gd php-pear phpunit \
vim-gnome subversion cvs php5-curl php5-dev php5-json

make

sudo apt-get install make

pear

sudo pear upgrade PEAR
sudo pear upgrade-all

xdebug

sudo pecl install xdebug

phpunit

sudo pear channel-discover pear.phpunit.de
sudo pear channel-discover pear.symfony-project.com
sudo pear install --force --alldeps phpunit/PHPUnit
sudo pear install phpunit/PHPUnit_Selenium
sudo pear install phpunit/DbUnit

phing

sudo pear channel-discover pear.phing.info
sudo pear install phing/phing

VersionControl SVN

sudo pear config-set preferred_state alpha
sudo pear install VersionControl_SVN

vfsStream

sudo pear channel-discover pear.bovigo.org
sudo pear install bovigo/vfsStream-beta

Apache setup

/etc/apache2/envvars
 export GLM_HOST_ID=DEVELOPMENT
sudo chown -R www-data.www-data /var/www
sudo chmod -R 2770 /var/www
sudo mkdir /var/www/server
sudo mkdir /var/www/log
sudo vim /etc/apache2/sites-available/default
 change all instances of /var/www to /var/www/server
 change <Directory /var/www/> to <Directory /var/www/server/>
 change the AllowOverride on the directory /var/www/server/ from None to All
sudo a2enmod rewrite
edit /etc/apache2/mods-enabled/dir.conf
 add index.phtml to DirectoryIndex
/etc/apache2/apache2.conf
 add "ServerName {yourservername}" to the end of the file to avoid complaints when restarting server.
sudo service apache2 restart

postgres setup

sudo vim /etc/postgresql/8.4/main/pg_hba.conf
Change all methods to trust
sudo service postgresql restart

* if you downgrade (from 9.1) to 8.4, uninstall the newer version before installing the older version, otherwise 8.4 will use
* port 5433, and you may start getting "could not connect to server: Connection refused" errors. You will need to 
* sudo vim /etc/postgresql/8.4/main/postgresql.conf and change the port number to 5432, and change the one for 9.1 to use 5433
* then, do "sudo service postgresql restart"

php setup

set your ini files to max memory of at least 60 or maybe 200
use sudo
 /etc/php5/cli/php.ini
  safe_mode_allowed_env_vars = PHP_,GLM_
  memory_limit = 200
 /etc/php5/apache2/php.ini
  variables_order = "EGPCS" -- refers to already uncommented one
  safe_mode_allowed_env_vars = PHP_,GLM_
  extension=xdebug.so -- may already be set up by pecl
  memory_limit = 200
go change the permission of the /usr/bin/phpunit file so your user can execute the file

(sudo chmod u+x /usr/bin/phpunit)

and change the /usr/share/php directory to yourself as the user

(sudo chown whateveryourusernameis /usr/share/php)

/etc/apache2/envvars
  export GLM_HOST_ID=DEVELOPMENT
/etc/profile
  umask 007
  export GLM_HOST_ID=DEVELOPMENT
sudo service apache2 restart

phpunit

For running phpunit you'll need to setup your ENV varaible of GLM_HOST_ID somehow.

You can setup a prepend file that gets prepended and sets the env that way.

this needs to be set in cli/php.ini not apache2/php.ini under the /etc/php5

You'll need to set error_reporting to E_NOTICE where it has DEPRECIATED and set allow_call_time_pass_reference = On

PDFlib

Install PDFlib version 9 for PHP

To download the current PDFlib, go to the following URL.

http://www.pdflib.com/download/

Select the following software section.

Download the PDFlib product family

Download the appropriate package family. Be sure to select the package for PHP! Typically your environment will be ...

Linux x86

or

Linux Intel 64

Save this file to your desired temporary location then un-archive the package. (Using correct file name of course.)

tar -zxf PDFlib-9.0.2-Linux-x86_64-php.tar.gz

Determine your version of PHP.

php -i | grep "PHP Version"

Determine the proper destination directory for the php_pdflib.so file. First check php.ini. (adjust directories as needed)

grep extension_dir /etc/php5/apache2/php.ini

If all resulting lines are commented out with ";", then look for the default directory. It will be something like ...

/usr/lib/php5/20090626/

Copy the php_pdflib.so file to the directory determined above and set the proper file mode. The correct source file will be in "bind/php/php-xxx" where xxx would be the version of PHP you have. (If your processor and operating system support Multi-Threading, use the file with "mt".) For example ...

sudo cp bind/php/php-530/php_pdflib.so /usr/lib/php5/20090626/.
sudo chmod 644 /usr/lib/php5/20090626/php_pdflib.so

Add the following to your php.ini file (usually /etc/php5/apache2/php.ini).

extension=php_pdflib.so

Restart Apache

sudo apache2ctl restart

To check if PDFlib loaded properly do the following. You should see several lines regarding PDFlib.

php -i | grep PDFlib

If there are problems, check the Apache error log.

Other

for some application that mail stuff out (forms and such) install sendmail and mailutils

Samba for /var/www/server

you have to install samba and smbfs first

sudo apt-get install samba smbfs

Edit /etc/samba/smb.conf Change workgroup as desired

 workgroup = FRNTOFFICE

Uncomment these

 wins support = no
 bind interfaces only = yes
 security = user

Comment out these

 unix password sync = yes
 map to guest = bad user

If you want access to your home directory, also uncomment and set these lines.

 [homes]
   comment = Home Directories
   browseable = yes
   writeable = yes
   valid users = %S

Add to end

 [server]
   comment = Web Server Files
   path = /var/www/server
   guest ok = no
   read only = no
   browseable = yes
   create mask = 0770
   directory mask = 2770
   valid users = {PUT YOUR USER NAME HERE}
   writable = yes

End of editing /etc/samba/smb.conf

run

 service smbd restart

Change permissions on everything in your www directory

 sudo chown -R www-data.www-data /var/www/*
 sudo chmod -R g+w /var/www/*

Edit /etc/group to add your user to group www-data - Just add your user ID to the end of the line and don't change anything else such as the gid which shows here as 33.

 www-data:x:33:cscott

SSH Server Setup - To be able to SSH to this virtual machine

apt-get install openssh-server

Setup with PHP 5.2

After check out of app.gaslightmedia.com

in your app.gaslightmedia.com directory

svn co http://cvs2/svn/glmZend/trunk glmZend
svn co http://cvs2/svn/glmPEAR/tags/5.2 glmPEAR
svn co http://cvs2/svn/ckeditor/trunk ckeditor
svn co http://cvs2/svn/CommonApps/trunk CommonApps

Setup with PHP 5.3

After check out of app.gaslightmedia.com

in your app.gaslightmedia.com directory

svn co http://cvs2/svn/glmZend/trunk glmZend
svn co http://cvs2/svn/glmPEAR/trunk glmPEAR
svn co http://cvs2/svn/ckeditor/trunk ckeditor
svn co http://cvs2/svn/CommonApps/trunk CommonApps

Setup with PHP 5.4

After check out of app.gaslightmedia.com

in your app.gaslightmedia.com directory

svn co http://cvs2/svn/glmZend/trunk glmZend
svn co http://cvs2/svn/glmPEAR/branches/5.4 glmPEAR
svn co http://cvs2/svn/ckeditor/trunk ckeditor
svn co http://cvs2/svn/CommonApps/trunk CommonApps

xdebug

to get work correctly you need html_errors On

Changing Console Resolution for Ubuntu Server

If you're running an Ubuntu Server (no GUI) as your virtual machine, you may want to change the screen resolution to save screen space or provide a larger screen area for your console. This is the procedure for doing so.

Reboot your virtual machine and enter "C" while on the Grub screen.

Enter "vbeinfo" to display the available resolutions and note the desired resolution from those available.

Boot your virtual machine.

edit "/etc/default/grub"

Set the resolution by changing the following line to the desired resolution.

 GRUB_GFXMODE=800x600

Enter the following command...

 sudo update-grub

Reboot and enjoy.

Install apt-show-versions to be able to list versions for installed packages (optional)

Install

sudo apt-get install apt-show-versions

Use

apt-show-versions {package}